Repairs to uPVC Windows
uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs and improve energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause significant damage to your home and even be fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.
Single-pane windows are relatively simple to replace, and they will usually fit into the old frames very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.
If you plan to try to remove the window panes by yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards fall on the fabric rather than on the floor where they can be trodden under and cause further damage.
Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is large, you might want to consider using the security door with an integrated window as this will offer the best of both worlds.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they can suffer from a variety of problems including sagging. A sagging uPVC window could cause issues with light, draughts and even security. It's crucial to act when you notice your uPVC windows are sliding.
Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need to open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the fit of your window, tighten the screws to secure them in place.
If you are unable to move the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.
UPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it can be due to the mechanism of the handle wears out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and perform a test fit. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.
3. Water Leaks
It is essential to act if you awake each day to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is a fairly simple fix that can be completed by any competent DIYer. Based on the severity of the issue the caulking that was used up might need to be removed before window repair service a fresh layer can be applied. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and decrease the efficiency of your energy usage.
Verify that the drainage holes do not have debris inside them and window repair ensure that the sill pan is properly angled to allow the water to drain from the window. In more extreme instances, you may need to replace the window.
Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread across the house.
If the leakage occurs between the double-glazed window, it is more likely the issue is with the seal rather than the frame. It is also possible to be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be the reason for the reason that your uPVC window is difficult to open or if it blows open with an ease. Any competent DIYer can replace the window and door repairs hinges in a matter of minutes.
Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical window and door repairs parts, they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window, but it's easier if someone helps you hold the frame.
It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.
The issue can be caused either due to opening the window in the wrong way or a faulty installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be pleased to offer you suggestions.
It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.
5. Draughts
Draughts can be caused by several different factors. The hinges may also become unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them aligned or replaced. Second, the interlock can be unbalanced. This is located on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace the hinges.
These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen draughts.
Another, and most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric filled with some type of filler. They can upvc window repair be put on the top of your windowsill. They can keep your home warm by blocking cold air.
Your windows made of upvc will keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that all windows have a life span and they may reach the point when it's more cost-effective to replace them rather than fix them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as possible.